Managing Attributes


The SDK allows you to store and retrieve attributes at different scopes. For example, you can use the attributes to store data that you retrieve on subsequent requests. You can also use attributes in your handler's canHandle logic to influence request routing.

An attribute consists of a key and a value. The key is enforced as a String type and the value is an unbounded Object. For session and persistent attributes, you must ensure that value types are serializable so they can be properly stored for subsequent retrieval. This restriction does not apply to request-level attributes because they do not persist outside of the request processing lifecycle.

Attributes Scopes

Request attributes

Request attributes only last within a single request processing lifecycle. Request attributes are initially empty when a request comes in, and are discarded once a response has been produced.

Request attributes are useful with request and response interceptors. For example, you can inject additional data and helper classes into request attributes through a request interceptor so they are retrievable by request handlers.

Session attributes

Session attributes persist throughout the lifespan of the current skill session. Session attributes are available for use with any in-session request. Any attributes set during the request processing lifecycle are sent back to the Alexa service and provided in the next request in the same session.

Session attributes do not require the use of an external storage solution. They are not available for use when handling out-of-session requests. They are discarded once the skill session closes.

Persistent attributes

Persistent attributes persist beyond the lifecycle of the current session. How these attributes are stored, including key scope (user ID or device ID), TTL, and storage layer depends on the configuration of the PersistenceAdapter.

AttributesManager

The AttributesManager exposes attributes that you can retrieve and update in your handlers. AttributesManager is available to handlers via the HandlerInput container object. The AttributesManager takes care of attributes retrieval and saving so that you can interact directly with attributes needed by your skill. The detailed description of AttributesManager can be found in the TypeDoc.

Available Methods

getRequestAttributes() : {[key : string] : any};
getSessionAttributes() : {[key : string] : any};
getPersistentAttributes() : Promise<{[key : string] : any}>;
setRequestAttributes(requestAttributes : {[key : string] : any}) : void;
setSessionAttributes(sessionAttributes : {[key : string] : any}) : void;
setPersistentAttributes(persistentAttributes : {[key : string] : any}) : void;
savePersistentAttributes() : Promise<void>;
deletePersistentAttributes?() : Promise<void>;

The following example shows how you can retrieve and save persistent attributes.

Copied to clipboard.

const PersistentAttributesHandler = {
  canHandle(handlerInput) {
    return new Promise((resolve, reject) => {
      handlerInput.attributesManager.getPersistentAttributes()
        .then((attributes) => {
          resolve(attributes.foo === 'bar');
        })
        .catch((error) => {
          reject(error);
        })
    });
  },
  handle(handlerInput) {
    return new Promise((resolve, reject) => {
      handlerInput.attributesManager.getPersistentAttributes()
        .then((attributes) => {
          attributes.foo = 'bar';
          handlerInput.attributesManager.setPersistentAttributes(attributes);

          return handlerInput.attributesManager.savePersistentAttributes();
        })
        .then(() => {
          resolve(handlerInput.responseBuilder
            .speak('Persistent attributes updated!')
            .getResponse());
        })
        .catch((error) => {
          reject(error);
        });
    });
  },
};

Copied to clipboard.

import {
  HandlerInput,
  RequestHandler,
} from 'ask-sdk-core';
import { Response } from 'ask-sdk-model';

const PersistentAttributesHandler : RequestHandler = {
  async canHandle(handlerInput : HandlerInput) : Promise<boolean> {
    const persistentAttributes = await  handlerInput.attributesManager.getPersistentAttributes();

    return persistentAttributes.foo === 'bar';

  },
  async handle(handlerInput : HandlerInput) : Promise<Response> {
    const persistentAttributes = await handlerInput.attributesManager.getPersistentAttributes();
    persistentAttributes.foo = 'bar';
    handlerInput.attributesManager.setPersistentAttributes(persistentAttributes);

    await handlerInput.attributesManager.savePersistentAttributes();

    return handlerInput.responseBuilder
      .speak('Persistent attributes updated!')
      .getResponse();
  },
};

PersistenceAdapter

The PersistenceAdapter is used by AttributesManager when retrieving and saving attributes to persistence layer (i.e. database or local file system). You can register any customized PersistenceAdapter that conforms to the following interface with the SDK.

Interface

interface PersistenceAdapter {
  getAttributes(requestEnvelope : RequestEnvelope) : Promise<{[key : string] : any}>;
  saveAttributes(requestEnvelope : RequestEnvelope, attributes : {[key : string] : any}) : Promise<void>;
  deleteAttributes?(requestEnvelope : RequestEnvelope) : Promise<void>;
}

DynamoDbPersistenceAdapter

ask-sdk-dynamodb-persistence-adapter package provides a DynamoDbPersistenceAdapter which is an implementation of PersistenceAdapter using AWS DynamoDB.

Constructor Details

new DynamoDbPersistenceAdapter(config = {}) => Object

Constructs a DynamoDbPersistenceAdapter object. This object is used by AttributesManager to retrieve, save and delete attributes object to/from a DynamoDB table. The table will have two columns: one for the partition key and one for attributes. If createTable config is set to true, SDK will attempt to create a new DynamoDB table with the given tableName when instantiating the DynamoDbPersistenceAdapter.

Examples

Copied to clipboard.

const { DynamoDbPersistenceAdapter } = require('ask-sdk-dynamodb-persistence-adapter');

const dynamoDbPersistenceAdapter = new DynamoDbPersistenceAdapter({ tableName : 'FooTable' })

Copied to clipboard.

import { PersistenceAdapter } from 'ask-sdk-core';
import { DynamoDbPersistenceAdapter } from 'ask-sdk-dynamodb-persistence-adapter';

const dynamoDbPersistenceAdapter : PersistenceAdapter = new DynamoDbPersistenceAdapter({ tableName : 'FooTable' });
Config Options
  • tableName (string) - The name of the DynamoDB table used.
  • partitionKeyName (string) - Optional. The name of the partition key column. Default to "id" if not provided.
  • attributesName (string) - Optional. The name of the attributes column. Default to "attributes" if not provided.
  • createTable (boolean) - Optional. Set to true to have DynamoDbPersistenceAdapter automatically create the table if it does not exist. Default to false if not provided.
  • partitionKeyGenerator (function) - Optional. The function used to generate partition key using RequestEnvelope. Default to generate the partition key using the userId.
  • dynamoDBClient (AWS.DynamoDB ) - Optional. The DynamoDBClient used to query AWS DynamoDB table. You can inject your DynamoDBClient with custom configuration here. Default to use new AWS.DynamoDB({apiVersion : 'latest'}).

Method Details

getAttributes(requestEnvelope : RequestEnvelope) : Promise<{[key : string] : any}>
The getAttributes operation retrieves the attributes from the DynamoDB table. It takes in a RequestEnvelope object and pass it to the PartitionKeyGenerator to generate the partition key. Then it will retrieve the attributes returned from DynamoDB that has a associated key of attributesName. When the corresponding partition key is not found, getAttributes will return an empty object.
saveAttributes(requestEnvelope : RequestEnvelope, attributes : {[key : string] : any}) : Promise<void>
The saveAttributes operation saves the attributes to the DynamoDB table using the partition key generated from the RequestEnvelope. It uses a DynamoDBDocumentClient with convertEmptyValues set to true. So that any "", null or undefined values in the attributes object will be converted.
deleteAttributes(requestEnvelope : RequestEnvelope) : Promise<void>
The deleteAttributes operation deletes the attributes from the DynamoDb table suing the partition key generated from the RequestEnvelope. This operation will also clear the locally cached persistent attributes to ensure consistency. If the attributes with the partition key does not exist in the table, deleteAttributes will do nothing.

S3PersistenceAdapter

ask-sdk-s3-persistence-adapter package provides a S3PersistenceAdapter which is an implementation of PersistenceAdapter using AWS S3.

Constructor Details

new S3PersistenceAdapter(config = {}) => Object

Constructs a S3PersistenceAdapter object. This object is used by AttributesManager to retrieve and save attributes object to a S3 bucket. Attributes object will be represented in individual files with the object key used as file name.

Examples

Copied to clipboard.

const { S3PersistenceAdapter } = require('ask-sdk-s3-persistence-adapter');

const S3PersistenceAdapter = new S3PersistenceAdapter({ bucketName : 'FooBucket' })

Copied to clipboard.

import { PersistenceAdapter } from 'ask-sdk-core';
import { S3PersistenceAdapter } from 'ask-sdk-dynamodb-persistence-adapter';

const S3PersistenceAdapter : PersistenceAdapter = new S3PersistenceAdapter({ bucketName : 'FooBucket' });
Config Options
  • bucketName (string) - The name of the S3 bucket used.
  • objectKeyGenerator (function) - Optional. The function used to generate object key using RequestEnvelope. Default to generate the object key using the userId.
  • s3Client (AWS.S3) - Optional. The S3Client used to query AWS S3 bucket. You can inject your S3Client with custom configuration here. Default to use new AWS.S3({apiVersion : 'latest'}).
  • pathPrefix (string) - The prefix value added to the object key generated. This is used for s3 to mimic a file system structure. Default to empty string.

Method Details

getAttributes(requestEnvelope : RequestEnvelope) : Promise<{[key : string] : any}>
The getAttributes operation retrieves the attributes from the S3 bucket. It takes in a RequestEnvelope object and pass it to the ObjectKeyGenerator to generate the object key. Then it will retrieve the attributes returned from S3 bucket. When the corresponding object key is not found or the object has no body data, getAttributes will return an empty object.
saveAttributes(requestEnvelope : RequestEnvelope, attributes : {[key : string] : any}) : Promise<void>
The saveAttributes operation saves the attributes to the S3 bucket using the object key generated from the RequestEnvelope.
deleteAttributes(requestEnvelope : RequestEnvelope) : Promise<void>
The deleteAttributes operation deletes the attributes from the S3 bucket using the object key generated from the RequestEnvelope.

Was this page helpful?

Last updated: Nov 28, 2023