Alexa.Speaker Interface 3


Implement the Alexa.Speaker interface in your Alexa skill so that users can control the volume of their entertainment devices that contain audio speakers. For details about entertainment device skills, see Build Smart Home Skills for Entertainment Devices.

Implement this interface for devices that can set the volume to any integer value in a continuous range of values. If your device can only adjust the volume in discrete steps, implement the StepSpeaker interface instead.

For the list of languages that the Alexa.Speaker interface supports, see List of Alexa Interfaces and Supported Languages. For the definitions of the message properties, see Alexa Interface Message and Property Reference.

Utterances

The Alexa.Speaker interface uses the pre-built voice interaction model. After the user says one of these utterances, Alexa sends a corresponding directive to your skill.

The following examples show some user utterances:

Alexa, set the volume of the speakers to fifty.
Alexa, turn the volume down on the stereo by twenty.
Alexa, turn the volume down on Living Room TV.
Alexa, mute speakers.
Alexa, unmute speakers.

Alexa, stelle die Lautstärke der Lautsprecher auf fünfzig.
Alexa, verringere die Lautstärke um zwanzig auf Stereoanlage.
Alexa, verringere die Lautstärke auf Wohnzimmer-Fernseher.
Alexa, Lautsprecher stummschalten.
Alexa, Lautstärke an auf Lautsprecher.

Alexa, imposta il volume degli altoparlanti a cinquanta.
Alexa, abbassa di venti il ​​volume dello stereo.
Alexa, abbassa il volume sulla TV del salotto.
Alexa, fare silenzio su altoparlanti.
Alexa, attiva l'audio degli altoparlanti.

アレクサ、スピーカーのボリュームを50にして
アレクサ、ステレオのボリュームを20下げて
アレクサ、リビングのテレビの音量を下げて
アレクサ、スピーカーをミュートして
アレクサ、スピーカーのミュートを解除して

Alexa, pon el volumen de los parlantes a cincuenta.
Alexa, reduce el volumen del estéreo en veinte.
Alexa, baja el volumen del televisor de la sala de estar.
Alexa, silencia los altavoces.
Alexa, activa los altavoces.

Alexa, zet het volume van de speakers op vijftig.
Alexa, zet het volume van de stereo lager met twintig.
Alexa, zet het volume van de woonkamertv lager.
Alexa, demp de speakers.
Alexa, dempen opheffen voor de speakers.

Reportable properties

The Alexa.Speaker interface supports the volume and muted properties. You identify that you support the properties in your discovery response.

Volume property

The Alexa.Speaker interface uses the volume property to represent the audio volume level of a device. The property is an integer and valid values from 0 to 100 inclusive. If the volume property is used to represent a change, then valid values are from –100 to 100 inclusive. In that case, a positive value increases the volume and a negative value decreases the volume.

The following example shows the volume property.

Copied to clipboard.

{
   "name": "volume",
   "value": 50
}

Muted property

The Alexa.Speaker interface uses the muted property to indicate whether the audio of a device is muted or not. The property is a boolean. Set to true if the device is muted and set to false if the device isn't muted.

The following example shows the muted property.

Copied to clipboard.

{
    "name": "muted",
    "value": false
}

Discovery

You describe endpoints that support Alexa.Speaker by using the standard discovery mechanism described in Alexa.Discovery.

Set retrievable to true for the properties that you report when Alexa sends your skill a state report request. Set proactivelyReported to true for the properties that you proactively report to Alexa in a change report.

Use SPEAKER, TV, STREAMING_DEVICE, GAME_CONSOLE, or other appropriate display category. For the full list of display categories, see display categories.

To let Alexa know the health of your device, also implement the Alexa.EndpointHealth interface.

Discover response example

The following example shows a Discover.Response message for a speaker device that supports the Alexa.Speaker and Alexa.PowerController interfaces. For the full list of recommended interfaces for an entertainment device, see Smart Home Skill Device Templates.

Copied to clipboard.

{
  "event": {
    "header": {
      "namespace": "Alexa.Discovery",
      "name": "Discover.Response",
      "payloadVersion": "3",
      "messageId": "Unique identifier, preferably a version 4 UUID"
    },
    "payload": {
      "endpoints": [
        {
          "endpointId": "Unique ID of the endpoint",
          "manufacturerName": "Manufacturer of the endpoint",
          "description": "Smart Speaker by Speaker Maker",
          "friendlyName": "Computer speaker",
          "displayCategories": ["SPEAKER"],
          "cookie": {},
          "capabilities": [
            {
              "type": "AlexaInterface",
              "interface": "Alexa.Speaker",
              "version": "3",
              "properties": {
                "supported": [
                  {
                    "name": "volume"
                  },
                  {
                    "name": "muted"
                  }
                ],
                "retrievable": true,
                "proactivelyReported": true
              }
            },
            {
              "type": "AlexaInterface",
              "interface": "Alexa.PowerController",
              "version": "3",
              "properties": {
                "supported": [
                  {
                    "name": "powerState"
                  }
                ],
                "retrievable": true,
                "proactivelyReported": true
              }
            },
            {
              "type": "AlexaInterface",
              "interface": "Alexa",
              "version": "3"
            }
          ]
        }
      ]
    }
  }
}

Directives

Alexa sends the following Alexa.Speaker interface directives to your skill.

SetVolume directive

Support the SetVolume directive so that users can set the volume on their devices.

The following examples show user utterances:

Alexa, set the volume of Living Room TV to fifteen.

Alexa, stelle die Lautstärke von Wohnzimmer-Fernseher auf fünfzehn.

Alexa, imposta il volume della TV del salotto su quindici.

アレクサ、リビングのテレビの音量を15にして

Alexa, pon el volumen de living room TV en quince.

Alexa, zet het volume van de woonkamertv op vijftien.

SetVolume directive example

The following example shows a SetVolume directive that Alexa sends to your skill.

{
  "directive": {
    "header": {
      "namespace": "Alexa.Speaker",
      "name": "SetVolume",
      "messageId": "Unique version 4 UUID",
      "correlationToken": "Opaque correlation token",
      "payloadVersion": "3"
    },
    "endpoint": {
      "scope": {
        "type": "BearerToken",
        "token": "OAuth2.0 bearer token"
      },
      "endpointId": "Endpoint ID",
      "cookie": {}
    },
    "payload": {
      "volume": 50
    }
  }
}

SetVolume directive payload

The following table shows the payload details for the SetVolume directive.

Property Description Type
volume The volume to set the device to. Integer

SetVolume response

If you handle a SetVolume directive successfully, respond with an Alexa.Response event. In the context object, include the values of all properties that changed.

The following example shows a SetVolume response.

Copied to clipboard.

{
  "event": {
    "header": {
      "namespace": "Alexa",
      "name": "Response",
      "messageId": "Unique identifier, preferably a version 4 UUID",
      "correlationToken": "Opaque correlation token that matches the request",
      "payloadVersion": "3"
    },
    "endpoint":{
      "endpointId": "Endpoint ID"
    },
    "payload": {}
  },
  "context": {
    "properties": [
      {
        "namespace": "Alexa.Speaker",
        "name": "volume",
        "value": 50,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.Speaker",
        "name": "muted",
        "value": false,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.PowerController",
        "name": "powerState",
        "value": "ON",
        "timeOfSample": "2017-02-03T16:18:40.12Z",
        "uncertaintyInMilliseconds": 500
      }
    ]
  }
}

SetVolume directive error handling

If you can't handle a SetVolume directive successfully, respond with an Alexa.ErrorResponse event.

AdjustVolume directive

Support the AdjustVolume directive so that users can adjust the volume on their devices.

The following examples show user utterances:

Alexa, turn the volume down on Living Room TV by twenty.

Alexa, Lautstärke auf Wohnzimmer-Fernseher um zwanzig verringern.

Alexa, abbassa di venti il ​​volume della TV del salotto.

アレクサ、リビングのテレビの音量を20下げて

Alexa, reduce el volumen del televisor de la sala en veinte.

Alexa, zet het volume van de woonkamertv lager met twintig.

AdjustVolume directive example

The following example shows an AdjustVolume directive that Alexa sends to your skill.

{
  "directive": {
    "header": {
      "namespace": "Alexa.Speaker",
      "name": "AdjustVolume",
      "messageId": "Unique version 4 UUID",
      "correlationToken": "Opaque correlation token",
      "payloadVersion": "3"
    },
    "endpoint": {
      "scope": {
        "type": "BearerToken",
        "token": "OAuth2.0 bearer token"
      },
      "endpointId": "Endpoint ID",
      "cookie": {}
    },
    "payload": {
      "volume": -20,
      "volumeDefault": false
    }
  }
}

AdjustVolume directive payload

The following table shows the payload details for the AdjustVolume directive.

Property Description Type
volume The amount by which to change the volume, relative to the current volume. Integer
volumeDefault False if the user specified the amount by which to change the volume; otherwise true. Boolean

AdjustVolume response

If you handle an AdjustVolume directive successfully, respond with an Alexa.Response event. In the context object, include the values of all properties that changed.

The following example shows an AdjustVolume response.

Copied to clipboard.

{
  "event": {
    "header": {
      "namespace": "Alexa",
      "name": "Response",
      "messageId": "Unique identifier, preferably a version 4 UUID",
      "correlationToken": "Opaque correlation token that matches the request",
      "payloadVersion": "3"
    },
    "endpoint":{
      "endpointId": "Endpoint ID"
    },
    "payload": {}
  },
  "context": {
    "properties": [
      {
        "namespace": "Alexa.Speaker",
        "name": "volume",
        "value": 30,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.Speaker",
        "name": "muted",
        "value": false,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.PowerController",
        "name": "powerState",
        "value": "ON",
        "timeOfSample": "2017-02-03T16:18:40.12Z",
        "uncertaintyInMilliseconds": 500
      }
    ]
  }
}

AdjustVolume directive error handling

If you can't handle an AdjustVolume directive successfully, respond with an Alexa.ErrorResponse event.

SetMute directive

Support the SetMute directive so that users can mute and unmute their devices.

The following examples show user utterances:

Alexa, mute Living Room TV.

Alexa, Wohnzimmer-Fernseher stummschalten.

Alexa, disattiva l'audio della TV in salotto.

アレクサ、リビングのテレビを消音にして

Alexa, silencia la TV de la sala de estar.

Alexa, demp woonkamertv.

SetMute directive example

The following example shows a SetMute directive that Alexa sends to your skill.

{
  "directive": {
    "header": {
      "namespace": "Alexa.Speaker",
      "name": "SetMute",
      "messageId": "Unique version 4 UUID",
      "correlationToken": "Opaque correlation token",
      "payloadVersion": "3"
    },
    "endpoint": {
      "scope": {
        "type": "BearerToken",
        "token": "OAuth2.0 bearer token"
      },
      "endpointId": "Endpoint ID",
      "cookie": {}
    },
    "payload": {
      "mute": true
    }
  }
}

SetMute directive payload

The following table shows the payload details for the SetMute directive.

Property Description Type
mute Set to true to mute the device, false to unmute the device. Boolean

SetMute response

If you handle a SetMute directive successfully, respond with an Alexa.Response event. In the context object, include the values of all properties that changed.

The following example shows a SetMute response.

Copied to clipboard.

{
  "event": {
    "header": {
      "namespace": "Alexa",
      "name": "Response",
      "messageId": "Unique identifier, preferably a version 4 UUID",
      "correlationToken": "Opaque correlation token that matches the request",
      "payloadVersion": "3"
    },
    "endpoint":{
      "endpointId": "Endpoint ID"
    },
    "payload": {}
  },
  "context": {
    "properties": [
      {
        "namespace": "Alexa.Speaker",
        "name": "volume",
        "value": 30,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.Speaker",
        "name": "muted",
        "value": true,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.PowerController",
        "name": "powerState",
        "value": "ON",
        "timeOfSample": "2017-02-03T16:18:40.12Z",
        "uncertaintyInMilliseconds": 500
      }
    ]
  }
}

SetMute directive error handling

If you can't handle a SetMute directive successfully, respond with an Alexa.ErrorResponse event.

State reporting

Alexa sends a ReportState directive to request information about the state of an endpoint. When Alexa sends a ReportState directive, you send a StateReport event in response. The response contains the current state of all the retrievable properties in the context object. You identify your retrievable properties in your discovery response. For details about state reports, see Understand State and Change Reporting.

StateReport response example

Copied to clipboard.

{
  "event": {
    "header": {
      "namespace": "Alexa",
      "name": "StateReport",
      "messageId": "Unique identifier, preferably a version 4 UUID",
      "correlationToken": "Opaque correlation token that matches the request",
      "payloadVersion": "3"
    },
    "endpoint": {
      "scope": {
        "type": "BearerToken",
        "token": "OAuth2.0 bearer token"
      },
      "endpointId": "Endpoint ID"
    },
    "payload": {}
  },
  "context": {
    "properties": [
      {
        "namespace": "Alexa.Speaker",
        "name": "volume",
        "value": 30,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.Speaker",
        "name": "muted",
        "value": false,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.PowerController",
        "name": "powerState",
        "value": "ON",
        "timeOfSample": "2017-02-03T16:18:40.12Z",
        "uncertaintyInMilliseconds": 500
      }
    ]
  }
}

Change reporting

You send a ChangeReport event to report changes proactively in the state of an endpoint. You identify the properties that you proactively report in your discovery response. For details about change reports, see Understand State and Change Reporting.

ChangeReport event example

Copied to clipboard.

{  
  "event": {
    "header": {
      "namespace": "Alexa",
      "name": "ChangeReport",
      "messageId": "Unique identifier, preferably a version 4 UUID",
      "payloadVersion": "3"
    },
    "endpoint": {
      "scope": {
        "type": "BearerToken",
        "token": "OAuth2.0 bearer token"
      },
      "endpointId": "Endpoint ID"
    },
    "payload": {
      "change": {
        "cause": {
          "type": "VOICE_INTERACTION"
        },
        "properties": [
          {
            "namespace": "Alexa.Speaker",
            "name": "volume",
            "value": 40,
            "timeOfSample": "2017-02-03T16:52:50.52Z",
            "uncertaintyInMilliseconds": 0
          },
        ]
      }
    }
  },
  "context": {
    "properties": [
      {
        "namespace": "Alexa.Speaker",
        "name": "muted",
        "value": false,
        "timeOfSample": "2017-02-03T16:20:50.52Z",
        "uncertaintyInMilliseconds": 0
      },
      {
        "namespace": "Alexa.PowerController",
        "name": "powerState",
        "value": "ON",
        "timeOfSample": "2017-02-03T16:18:40.12Z",
        "uncertaintyInMilliseconds": 500
      }
    ]
  }
}

Was this page helpful?

Last updated: Aug 23, 2024